HST Series Accessories

Remote Temperature Output Connection Cable
Specifications
Part Number: HSTA5CBL

FEATURES:

• This double banana plug cable is designed to be used with all standard .166” (4mm) diameter banana jacks. It can be used with most digital multimeters that have the common and volt-ohm jacks at the standard spacing. These jacks are usually spaced at .75” (19mm) apart
• Use with 23' (7m) HST extension cable p/n HST-EXT-CBL for combined reach of about 27.5' (8.3m)

MATERIALS:

• The double banana plug is insert molded with black polypropylene
• The cable is RG58C/U - 0.195” diameter – 50 ohms impedance
• The HST double pin cable connector is UL recognized black Nylon

ELECTRICAL / MECHANICAL:

• Durability – minimum 300 cycles without mechanical or electrical failure
• Voltage – Maximum 24vdc @ 2 amps

ENVIRONMENTAL:

• Temperature-  -55°C to +55°C (-67°F to +131°F)
• Corrosion 300 Hr salt spray contacts