HST Series Accessories

HST Power Supply
Specifications
Part Numbers: HSTPWR148, HSTPWR185, HSTPWR259

FEATURES:

Universal AC input
3 pole AC inlet connector IEC320-C14
Output:

15VDC (14 volt HST models)
20VDC (18 volt HST models)
24VDC (24 volt HST models)

Allows for providing power to HST heat detector tester at distances of up to 20 feet away when used with 20' extension cable p/n HSTEXT148, HSTEXT185, or HSTEXT259
Fanless design, cooling by free air convection

MATERIALS:

Housing- hard ABS plastic
Output cable connector- 250 volt, IP40 connector, bayonet locking, PA and PBT plastic

ELECTRICAL / MECHANICAL:

Durability – minimum 300 cycles without mechanical or electrical failure
Voltage- 90-264VAC
Frequency range- 47-63Hz
AC current- 3A/115VAC 1.5A/230VAC
Model, Voltage, Connector configurations:

Model HSTPWR148, use with 14 volt HST, 15vdc output, 2pin connector
Model HSTPWR185, use with 18 volt HST, 20vdc output, 4pin connector
Model HSTPWR259, use with 24 volt HST, 24vdc output, 3pin connector

Weight: 1.5kg

ENVIRONMENTAL:

Temperature- -30°C to +60°C
Humidity- 20%-90% RH non-condensing

High Temperature Heat Detector Tester

Important directions on safe usage

When using power supply with extension cable part numbers HSTEXT148, HSTEXT185, or HSTEXT259, the extension cable must be fastened to the inspection pole using the rubber strap provided. The purpose of this is to provide strain relief on the connectors and to prevent the cable from falling on the user should the connection to the HST become disconnected. Make sure that cable does not touch hot surface, moving equipment, or any other dangerous surface.
See following picture for clarification.

Fire-Lite Heat detector tester